Easiest felt flower tutorial

Felt flower diy

I love DIY and wanted to share this DIY felt flower tutorial with all of you, I call this the easiest felt flower tutorial because it really is! Just read on to find out why!

Felt flowers are so easy to make and can make great home decor. Felt comes in lots of beautiful colors, it is very inexpensive also. In Walmart, it is available for 33 cents a sheet. I’m sure if you buy it in bulk, you can get it even cheaper. 

You can find felt sheets in any craft store. Amazon also has a wide variety of colors in felt. I love working with felt, it’s soft and can be made into so many beautiful and useful things.

There are many different kinds of flowers that you can make using felt. And all of them are gorgeous! I just chose the easiest one to share.

These are easy enough for kids to make, provided they are old enough to handle a hot glue gun. I am guessing that fabric glue could be used too but I have not tried. Please do let me know if you have tried and it worked for you. 

Make them in any color and even different sizes. I love these because they can be used to make beautiful wreaths, if you add a stem you can use them in flower vases. I just gathered sticks from my backyard and used them as stems.

Red and white felt flowers in vase

 

Supplies needed for the felt flower DIY:

Felt in different colors

Scissors 

Hot glue glue

If you are adding stems, you could just gather some sticks from your garden as I did! 

Other options that would work are floral wire or pipe cleaners. 

How do you make them? 

  1. Cut out rectangular shapes from your felt sheet. Small rectangles will yield small flowers, bigger rectangles will yield bigger flowers. 

     2. Fold the rectangle in half lengthwise. Using the glue gun, glue down the open side of the rectangle. 

     3. Using scissors cut lines at regular intervals on the folded side but do not cut all the way, leave about 1/2 inch on the other side.

    4. From one side, start rolling your rectangle gluing as you go. 

    5. To attach the stem, glue it as you start rolling in the above step. Or you could just add some glue on one end of the stick/pipe cleaner/wire and stick it in the base of the flower.

Notes

If you do not use a stem, glue your roses onto your wreath, picture frame, or whatever you make. 

That’s it! Easy and beautiful! 

If you like DIY please check out my other projects: Paper Bunny Garland

and

Farmhouse Bead Garland DIY

If you are a crafty person and love to make things, you will love Lia Griffith

Her website is packed with beautiful crafts made using different types of materials. I highly recommend visiting her website. You will be blown away by her and her team’s creativity and beautiful pictures!

As always thank you for visiting, it does mean a lot to me!

If you liked this felt flower, please try it out and comment down below. I would love to hear from you.

Have a wonderful day!

 

Continue Reading

DIY Farmhouse Bead Garland

Have you seen these Farmhouse Bead Garlands in pictures of beautiful homes? These garlands are a very popular item for home decor. I am going to show you how easy it is to make a DIY Farmhouse Bead Garland.

I have always admired them, it adds a real decorative touch to any room. Something so simple can be used in many ways to style your home. They are draped on vases, on books, on coffee tables, on entryway tables, dressers, bedside tables, even in bathrooms! 

Wooden bead garland DIY

 

I wanted to buy one and looked it up online, when I saw the price tag, it was anywhere from 7$ To 25$ and more!

So I decided to make this at home for a fraction of the cost. It is relatively easy and needs very few supplies.

I am sharing this DIY with all of you which is fun to make and takes less than 15 to 20 minutes! 

Supplies needed for this DIY Farmhouse Bead Garland:

Supplies for wooden bead garland

Wooden beads – I got mine from Micheals, a box of wooden beads is 9.99$. They come in 3 different sizes. By using a 40% coupon you could get them for less! You could make at least 5 garlands with the quantity that you get. 

The wooden beads are also available in any craft store or on Amazon. I hear that you could buy them in bulk and it is much cheaper. 

Jute string – The jute string I found at Ross for 1.99$, you can get it at the dollar tree or Amazon. It has to be thin enough to fit through the hole in the wooden beads.

Scissors 

Masking tape or cello tape – this is just used to make it easier to string the beads. Add a little bit of masking tape or cello tape to the end of your string to make it kind of like a needle. 

Or you could use a large yarn needle also to make things easier. 

That’s it! 

These are my Amazon Picks for this project:

(Disclaimer: These are affiliate links, which means if you buy any of these recommended products, I will receive a small commission from Amazon at no extra cost to you. Please know that I only recommend products that I know to be of great quality. Thank you so much for your support!)

Gather your supplies and let’s get started making our Farmhouse Bead Garland!

Super simple and easy. To summarize all you have to do is make 2 tassels, add one tassel at one end, string the beads onto the jute string, add the other tassel at the other end, and you are done!

Let’s see how to make this in detail:

 

  • To make the tassels: Wrap the string around your fingers about 20 times. Cut a piece of string to tie the tassel on top. Tie the string about half an inch from the top. Cut off the excess string once it is secure. I would even go the extra mile and add a drop of glue to seal it. 
  • Snip the bottom loops and your tassel is ready. 
  • Make 2 of them. 
  • Measure a piece of string, depending on how long you want your garland. I cut mine about 18 inches. 
  • Add the tassel to one end by simply tying it on through the loop on top. Make sure it is secure. Here also you could add a drop of glue to secure it.
  • Cut a small piece of tape and wrap it around the other end of the string, we are using this as a needle so the string does not get frayed. I recommend using a yarn needle if you have one that’s large enough to go through your beads, it does make it easier.
  • String the beads onto the string. I used around 40. It could depend on the size of your beads. You can use a combination of beads, make it your own.
  • Once all the beads are on the string, tie the other tassel on that end. Trim off the excess string. Use glue to secure.
  • Your farmhouse tassel garland is ready! 

 

NOTES:

You could color your beads if you have a specific color scheme in mind. A mix of colored and regular wooden beads can be used as I did in the above picture. 

I experimented with coloring the beads with food color. It worked well, you do not get a vibrant color but a rather nice dull color which I thought looked good with the regular wooden beads. 

For coloring the beads, all I did was put the beads in a bowl, added food color and just a little water, shook them up, kept them for about an hour.  Drain the excess water and kept the beads out in the sun to dry on a paper napkin. Once dry you can make your garland! It is that easy.

I am sure you can paint the beads too, I did try once and it was too much work, so I gave up!

You can also buy the colored beads/patterned beads of your choice. You get some great options on Amazon.

The garland can be tied halfway to create a loop to hang it onto a vase as shown in the picture below.

DIY wooden bead garland

Use differently shaped beads. 

There are a lot of possibilities so use your imagination and go wild! 😄

I thought I would share my favorite home decor blog with you if you are interested in home decor, do visit Yvonne at Stonegableblog

Her blog has the most pleasing pictures and her content is amazing.

Thank you for visiting and hope you will try this out soon. Please let me know if you liked it by leaving a comment down below.

I appreciate you being here.

Have a wonderful day!

Continue Reading

DIY Paper Bunny Garland

Paper bunny garland

This DIY Paper Bunny Garland is a fun, easy Project. Everyone loves DIY decor especially when you are on a budget! So here is an easy Easter Project to decorate your home.

Bunny garland

 

Decorate your home with this Easter Bunny Garland, hang it up on your fireplace mantel, on a window or across an entryway table. Wherever you put it can elevate your Easter Decor.

It is so easy to do, you will need  a template of an Easter bunny, you can find one here: https://www.easypeasyandfun.com/printable-easter-silhouette-craft/ 

Other materials include:

A few different patterns of  Scrapbook paper

Cotton balls

Scissors

Twine or ribbon

Hot glue gun

(The above links are affiliate links which means I will earn a small commission if you buy these items using my links, this is at no extra cost to you. I only recommend products that I love and are of great quality. Thank you so much for your support.)

How to make this DIY Easter Bunny Garland:

Trace the bunny template onto the scrapbook paper and cut out as many as you want. Choose different designs that go together, or if you have a color theme you could choose the paper accordingly. I cut out 8 bunnies.

Stick the cotton balls on the bottom for their tails. You could also use pom-poms. 

Here is a link to a  super cute Easter Bunny garland with pom poms: https://diycandy.com/easter-bunny-garland/

Lay your twine or ribbon down on a table, use hot glue to stick the bunnies onto the ribbon/string at regular intervals. I have used a thin satin ribbon. 

There you have it!  Your easy peasy Easter bunny garland! All you have to do is hang it up! I just secured it to my mantel with tape.

Hope you will try out this DIY project to decorate your home this Easter!

Easter bunny paper garland

Paper bunny garland

Continue Reading